Replacement tooling for tube bending machines designed to fit a wide range of tube bending equipment. With options for different radii, sizes, and material types.
Sorry, no results were found, please enquire below.
Frequently Asked Questions About Tube Bender Tooling
Bend formers (dies), clamp dies, pressure dies, wiper dies, mandrels (plug/ball), collet inserts and wear items—covering common styles including AB-CF, AB-CTA, AB-PF and CS.
Match CLR to the part print. As a rule of thumb, start at 2–3× outside diameter for standard steels and increase for thin-wall or harder materials. We can check feasibility and springback.
Tube OD, wall thickness, material/temper, required CLR, bend angle, minimum straight between bends, lubrication preference, machine make/model and the style you need (e.g., AB-CF).
For thin-wall tube, tight CLRs or aesthetic parts, yes—use a mandrel to support the ID and a wiper to control outside wrinkling. For thicker-wall and relaxed radii, a simple set may suffice.
Mild and stainless steel, aluminium, copper/brass and many alloys, typically from small instrument tube up to heavy section. Tell us your size range and we’ll confirm coverage.
We supply to fit a wide range of rotary-draw and mandrel benders. Share your make/model (e.g., Memoli ETM/Eurekamatic or equivalent) and the nose/drive details and we’ll confirm fitment.
Yes—custom formers, stepped radii, non-round profiles and hard coatings are available to suit production needs.
Use polished tooling faces, appropriate lubricants and, for critical finishes, protective bending film or softer surface inserts.
Standard sets are often available on short lead times; specials depend on complexity. All tooling is supported in the UK by the JPS Machinery team.
