RPM2 PEG – Vices pressure control Pegasus+CN

An option for FMB horizontal bandsaws that lets you manually adjust clamping pressure on the cutter vice and the carriage vice.

It’s used on FMB horizontal bandsaws running Pegasus+CN control.

It controls the clamping pressure of the cutter vice and the carriage vice, so material can be held appropriately for the job.

Yes — each vice is adjusted independently, so you can set different clamping pressures if needed.

Adjustment is done by hand using the handwheel on the valve.

A pressure gauge shows the pressure change in bar, so you can set and repeat a known clamp pressure.

To help secure different materials and section types without over-clamping, supporting more consistent holding during cutting.

The FMB model, whether it has Pegasus+CN control, the typical section types you cut, and whether you need different vice pressures for repeat work.