Which S Series model is right for my parts?

The S20 is rated at 20 tons over 950 mm, the S40 at 40 tons over 1,250 mm and the S60 at 60 tons over 2,100 mm. Model choice also depends on material, thickness, bend length, tooling and die opening. Send JPS your drawings so we can check the bending requirement before recommending a machine.

Can the S Series bend my material and thickness?

That depends on the material strength, thickness, bend length and tooling for each part. The tonnage rating alone does not establish whether a bend is possible. We can review your drawings and material details to identify a suitable model and tooling arrangement.

Will my existing press brake tooling fit?

MVD lists Promecam-style quick clamping and a European-type bottom table for the S Series. Tool height, tang and die-holder dimensions still need checking. Send us your tooling references or drawings and we can confirm compatibility and any clamping options.

Which CNC control and safety equipment come as standard?

MVD publishes the ESA S630 with four CNC axes—Y1, Y2, X and R—for the S Series. Its standard feature list also includes laser front protection, quick clamping, LED lighting and sliding front supports. We will confirm the exact control, guarding and other equipment in the quotation.

Should I choose the screw driven S Series or the belt driven E Series?

The S Series covers shorter bends and 20–60 ton capacity using a screw and nut drive. The E Series covers longer bends and 80–200 ton capacity using a belt and pulley drive. Your parts, production volume, tooling and required working length will determine which range is the better fit.

What information does JPS need for a quotation?

Send us your part drawings or bend details, material and thickness, longest bend, existing tooling details and any control or automation preferences. We can then discuss the model, options, installation and operator training needed for your workshop.

MVD iBend S Series Servo-Electric Press Brake: 20–60 Ton x 950–2100 mm

MVD iBend S Series Servo-Electric Press Brake: 20–60 Ton x 950–2100 mm - Image 3

MVD iBend S Series Servo-Electric Press Brake: 20–60 Ton x 950–2100 mm - Image 4

Compact Servo-Electric Bending for Smaller Parts

The MVD iBend S Series is a CNC press brake for workshops bending smaller sheet metal components and shorter lengths. Its servo motors drive the upper beam through a screw and nut system, giving you an electric machine without a conventional hydraulic drive.

The S20, S40 and S60 cover 20–60 ton capacities and bending lengths from 950 to 2,100 mm. Send us your drawings, material and tooling details and we can help you choose the right model and configuration.

Description

MVD iBend S Series Servo-Electric Bending Technology

The S Series is a compact CNC press brake for smaller components, shorter bends and repeat production work. Servo motors transmit bending force through screw shafts and nut assemblies, while CNC control of Y1, Y2, X and R helps operators position the beam and backgauge for repeat jobs.

Choosing an S Series model

The S20 offers 20 tons over 950 mm, the S40 offers 40 tons over 1,250 mm and the S60 offers 60 tons over 2,100 mm. The right model depends on the material, thickness, bend length, tooling and V-opening for your parts. JPS can check these details against your drawings before recommending a machine.

Control and equipment

ESA S630 CNC control and four CNC axes: Y1, Y2, X and R, in MVD’s published standard specification
Servo driven backgauge with two fingers
210 mm stroke, 410 mm daylight and 300 mm throat depth across the listed S20, S40 and S60 models
Promecam-style quick clamping, laser front protection, LED lighting and sliding front supports

Other control, backgauge, guarding and front working table options can be discussed when we prepare a quotation. We will confirm the equipment and safety arrangement for your installation.

Choosing between S and E Series

The S Series uses a screw-driven servo-electric system and covers 20–60 ton capacities with bending lengths from 950 to 2,100 mm. For longer bends or greater bending force, the MVD iBend E Series covers 80–200 tons and uses a belt-driven servo-electric system. JPS can compare both ranges against your material, part dimensions, tooling and production requirements.

UK installation and support

JPS Machinery can advise on machine selection, tooling and site requirements, then arrange installation, commissioning, operator training and ongoing service support in the UK.

Videos

FAQs about the MVD iBend S Series Servo-Electric Press Brake

Models in this range

Model	Bending Force	Bending Length	Backgauge Finger Count	Stroke	Daylight	Throat	Table Height	Machine Dimensions			Speed			Motor Count	Main Motor	Weight
	Ton	A	Pcs	C	J	D	E	Length	Width	Height	Approach Speed	Return Speed	Bending Speed	Pcs	kW	kg
	Ton	mm	Pcs	mm							mm/s			Pcs	kW	kg
S20	20	950	2	210	410	300	-	1610	1350	2570	150	150	10-20	2	4.3	2900
S40	40	1250	2	210	410	300	-	1960	1450	2610	150	150	10-20	2	2 × 4.3	4000
S60	60	2100	2	210	410	300	-	2840	1450	2610	150	150	10-20	2	2 × 7	5300

MVD specifies bending speeds above 10 mm/s for robotic applications only. Confirm the operating speed for the proposed installation.

MVD iBend S Series Servo-Electric Press Brake: 20–60 Ton x 950–2100 mm

Compact Servo-Electric Bending for Smaller Parts

MVD iBend S Series Servo-Electric Bending Technology

Choosing an S Series model

Control and equipment

Choosing between S and E Series

UK installation and support

FAQs about the MVD iBend S Series Servo-Electric Press Brake

Models in this range

Subscribe to our Newsletter

Newsletter

Fully supported by

Robotic Manufacturing Cells

China's No° 1 Laser for 5 Years

Fully supported by