How do I choose the right E Series tonnage?

Start with the material, thickness, bend length, tooling and V-opening for your parts. The E Series covers 80, 100, 130, 160 and 200 tons, but the tonnage required depends on the bend itself. Send JPS your drawings and material details so we can check capacity before recommending a model.

Which E Series models offer a 4,100 mm bending length?

The E130, E160 and E200 are available with a 4,100 mm bending length. The E80 has a 2,600 mm length, while the E100 and shorter E130 and E160 versions have a 3,100 mm length.

Will my existing press brake tooling fit?

The published E Series specification includes Promecam-style quick clamping and a European-type bottom table. Tool height, tang and die-holder dimensions still need checking against your existing tooling. Send us the tool drawings or references and we can confirm compatibility and any clamping options.

What is different about the E Series servo-electric drive?

Two synchronised servo motors move the upper beam through a belt and pulley system, with springs assisting its return. This avoids the conventional hydraulic drive used on MVD’s hydraulic iBend ranges. Whether it is the right choice depends on your bending work, production pattern and required tonnage.

Which CNC control and axes come with the machine?

MVD publishes the ESA S630 and four CNC axes—Y1, Y2, X and R—in its standard E Series specification. Other control and backgauge configurations may be available. JPS will confirm the controller and axis package in the quotation.

What safety equipment and options can be specified?

MVD lists front laser protection, quick clamping, LED lighting and sliding front supports in its published standard features. Alternative front protection, additional backgauge equipment, crowning and tooling arrangements are available as options. We will confirm the guarding and exact equipment for your machine and site.

Can the E Series bend my material and thickness?

Suitability depends on material strength, thickness, bend length, tooling and die opening, as well as the selected machine’s tonnage. We would check your part drawings and bending requirements before confirming a model; a capacity figure alone cannot establish what any particular part needs.

What does JPS need to prepare a quotation?

Send us your part drawings or bend details, material and thickness, longest bend, current tooling details and any control or automation preferences. We can then discuss a suitable E Series model, options, installation and operator training.

MVD iBend E Series Servo-Electric Press Brake: 80–200 Ton x 2600–4100 mm

Belt-Driven Servo-Electric Bending for Production Work

The MVD iBend E Series is a CNC press brake for workshops that need repeatable bending across a range of sheet metal jobs. Two synchronised servo motors drive the beam through a belt and pulley system, with an O-type frame and programmable Y1, Y2, X and R axes.

The range covers 80–200 ton models and bending lengths from 2,600 to 4,100 mm. Tell us the material, thickness, bend length and tooling you use, and we can help specify the machine and options for your work.

Description

MVD iBend E Series Servo-Electric Bending Technology

The E Series uses two synchronised servo motors and a belt and pulley drive to move the upper beam. The O-type frame supports the bending load, while CNC control of Y1, Y2, X and R helps operators set up repeat work accurately. It is an option for fabricators considering an electric press brake in the 80–200 ton range.

Choosing an E Series model

Seven configurations cover bending lengths of 2,600, 3,100 and 4,100 mm. The E80 starts the range at 80 tons; the E130 and E160 each have 3,100 mm and 4,100 mm versions; and the E200 provides 200 tons over 4,100 mm. The right machine depends on your material, thickness, bend length, V-opening and tooling. JPS can check these against your drawings before recommending a model.

Control and standard equipment

Four CNC axes: Y1, Y2, X and R, with two backgauge fingers
ESA S630 CNC control in MVD’s published standard specification
Servo driven backgauge, quick clamping, laser front protection, LED lighting and sliding front supports
Stroke of 300 mm on E80–E130 and 260 mm on E160–E200

Alternative CNC controls, backgauge arrangements, crowning and tooling systems can be discussed when we prepare a quotation. We will confirm the exact machine configuration and safety equipment for your installation.

UK installation and support

JPS Machinery can advise on machine selection, tooling and site requirements, then arrange installation, commissioning, operator training and ongoing service support in the UK.

Videos

FAQs about the MVD iBend E Series Servo-Electric Press Brake

Models in this range

Model	Bending Force	Bending Length	Backgauge Finger Count	Stroke	Daylight	Throat	Table Height	Machine Dimensions			Speed			Motor Count	Main Motor	Weight
	Ton	A	Pcs	C	J	D	E	Length	Width	Height	Approach Speed	Return Speed	Bending Speed	Pcs	kW	kg
	Ton	mm	Pcs	mm							mm/s			Pcs	kW	kg
E80	80	2600	2	300	505	O-Type	900	3750	1900	2500	100	100	10-20	2	11.5	6200
E100	100	3100	2	300	505	O-Type	900	4275	1950	2500	95	95	10-20	2	11.5	7150
E130-A	130	3100	2	300	505	O-Type	900	4275	1950	2500	85	85	10-20	2	15.5	8700
E130-B	130	4100	2	300	505	O-Type	900	5275	1950	2500	75	75	10-20	2	15.5	11000
E160-A	160	3100	2	260	465	O-Type	900	4285	1950	2500	95	95	10-20	2	22.0	12500
E160-B	160	4100	2	260	465	O-Type	900	5300	2000	2550	85	85	10-20	2	22.0	14300
E200	200	4100	2	260	465	O-Type	900	5050	2000	2650	70	70	10-20	2	25.5	17000

MVD iBend E Series Servo-Electric Press Brake: 80–200 Ton x 2600–4100 mm

Belt-Driven Servo-Electric Bending for Production Work

MVD iBend E Series Servo-Electric Bending Technology

Choosing an E Series model

Control and standard equipment

UK installation and support

FAQs about the MVD iBend E Series Servo-Electric Press Brake

Models in this range

Subscribe to our Newsletter

Newsletter

Fully supported by

Robotic Manufacturing Cells

China's No° 1 Laser for 5 Years

Fully supported by