FMB Pegasus DS

Semi-automatic bandsaw machine to cut from 0° to 60° right, from 0° to 45° left and up to 60° for trim cut.
Head structure in 3 parts: special aluminium alloy, steel and cast iron.
Head feeding system with hydraulic cylinder and front balanced valve for feeding regulation and cutting optimizing.
Dynamometric blade tensioning.
Broken blade micro.
DTI “interrupted cut device” installed as standard equipment.
Direct drive: Reduction gear box with inclined grinded case hardened teeth lubricated with long lasting grease.
16÷120 m/min VHZ electronical blade speed regulation for a wide range of blade speed selection.
Connection of the motor wheel to a flange with two conical bearings.
Blade cleaning brush driven by motor gearbox.
Blade guide with combined action of side bearings, carbide plates and top bearing.
Material clamping vice with rack system, manual positioning and hydraulic stop cylinder.
Manual vice translation, right-left, on linear guides with mechanical stops and locking system.
Ergonomic working table and control panel.
Head rotation angle stop at 0°, 45° and 60° and digital display for the visualization of the cutting angle and rugged in construction locking lever.
Two-rolled roller table for material supporting in loading side placed on the basement.
The roller table as the possibility to slide back so to guaranty material support also during mitre cuts.
Heavy duty basement. Sheet metal construction in different thickness, chips holding sides.
Hydraulic cooling pump with 80 l capacity located in the back of the basement for feeding both blade guides.
Hydraulic unit for head cylinder movement, vice cylinder.
Electrical cabinet with 24VAC, lockable main switch and electric drives.
Total protection against highest voltage and short circuit current. Protection level IP 55.
Push buttons control panel to cary out all machine movements and detect possible alarms.
Line voltage: 400V/50Hz/3Ph standard (230V/50Hz/1Ph-230V/50Hz/3Ph-220V/60Hz/1Ph-220V/60Hz/3Ph-440V/60Hz/3Ph-575V/60Hz/3Ph available).
Machine colours: yellow RAL 1018 and grey RAL 7036.