8:00 – 17:00
Mon – Fri:

0113 236 3366

Contact
Get a Quote

FMB Hercules+CN

metal cutting bandsaw

Hercules+CN
Automatic Bandsaw

Get a Quote
Download Brochure
  • AUTOMATIC DOUBLE COLUMN BANDSAW MACHINE with blade h34 FOR 0° CUTS WITH CAPACITY UP TO 330x510mm.
  • Totally protected machine with easy access to the working area for maintenance or cleaning operations.
  • Possibility to load material directly with a crane on the machine’s carriage.
  • Machine with equipment for its lifting with crane or forklift.
  • Carriage 500mmlong, managed by screw and encoder for the measure reading
  • The carriage drives back after the cut in order to avoid damages at the blade, this can beset from the software.
  • The carriage vice has a movable jaw, for the managing of not straight material.
  • Scrap of 55mm, the MSR (vice for reduced scrap) is standard.
  • Both vices, the cutting vice and the material feeding vice are equipped with cylinders at total stroke.
  • Minimal cutting length = 8mm.
  • Head descent on double column on linear guides.
  • Reduction gearbox with hardened gears, using 95% of the engine power.
  • Hydraulic blade stretching as option.
  • Sensor for the blade rotation verify + stress detector as standard
  • Inverter for the blade speed regulation from 16 to 120m/min as standard
  • Mechanical device for the material recognizing on the feeding system.
  • Swarf extractor as standard, which can be put on both sides and Its timing can be set on the panel.
  • Tank for the lubrication liquid with capacity 100L and 3 different point of lubrication.
  • 10′ touch screen control panel.
  • Automatic setting of the correct parameters for the cut through software depending on material and dimensions.
  • Linux software against viruses.
  • The main languages are available.
  • 19 types of materials are already loaded, but there is always the possibility to insert new materials.
  • Up to 90 programs are available.
  • Statistics for the verify of the machine activity are always available
  • Cutting counter.
  • Possibility to modify the length, the pieces number and the interrupted cut also during the started cycle.
  • Suggestion of the correct tooth pitch and adjusting of the cutting speed referring to the realone.
  • MT-A (Option)for the support from distance.

No videos found. Please check back soon!

Subscribe to our Newsletter

Newsletter

Sign up to our newsletter

Fully supported by

Robotic Manufacturing Cells

Get A Quote

China's No° 1 Laser for 5 Years

Fully supported by

Get A Quote