FM..RS – Length stop

The FM..RS – Length stop is used to set and repeat cut lengths on an FMB horizontal bandsaw roller table. It gives the operator a clear stop point so material can be positioned more consistently before cutting.

A length stop helps by giving the operator a fixed reference point for positioning stock. In practice, that makes it easier to prepare repeated lengths and reduces the need to measure each piece again from scratch.

Yes. It is especially useful for repeat cutting because it helps the operator set the same length more consistently across multiple pieces, which can improve workflow and reduce avoidable variation.

The articulated striker provides the contact point for setting the material position against the stop. In day-to-day use, that helps create a practical and repeatable reference when preparing stock for cutting.

The supplied specification states that it can be fitted for measure stops from 1 to 6 metres on RP roller tables. That gives it a useful range for workshops handling different stock lengths and roller table setups.

It is worth adding when repeat lengths are part of regular production, when manual measuring is slowing the process down, or when the workshop wants a more consistent way to position stock before each cut.

Workshops using FMB horizontal bandsaws for repeated cutting work are likely to benefit most, especially where operators need a quicker and more dependable way to set material lengths on the roller table.

Yes. Its main value is in giving the operator a repeatable reference point, which helps produce more consistent cut lengths and a more controlled setup process.