P40 POSITION CONTROLLER FOR 1 OR 2 AXES POSITION CONTROLLER FOR METAL OR WOODWORKING MACHINES
Mechanical Data
| Housing | panel housing |
| Housing material | front plate: aluminium, housing: galvanized steel sheet |
| Front plate dimensions (W x H) | 144 x 144 mm |
| Housing dimensions (W x H) |
136 x 136 mm |
| Panel cut out (W x H) | 138 x 138 mm |
| Keyboard | foil, short stroke keys |
| Installation depth | 40 mm (without connectors), 74 mm (with connectors) |
Electrical Data
| Display | LCD dot matrix 120 x 80 pixels with white background lighting |
| Hardware | 32 bit microcontroller with 1 MByte flash and 56 KByte RAM |
| Program memory | up to 1.000 steps, more on request |
| System accuracy | ± 1 increment |
| Power supply voltage | 24 VDC +10/-20 % |
| Current consumption | max. 150 mA (unloaded), permitted total current (incl. self-consumption): 1 A |
| Encoder supply voltage | 24 VDC or 5 VDC |
| Load by encoder / measuring system | max. 130 mA |
| Input signals (measuring system) | HTL, TTL, analog (order disignation) |
| Signal channels | A, B, Z, resp. A, A', B, B', Z, Z' or analog 0 ... 3.3 V (order designation) |
| External inputs | 16 x digital PNP inputs, assignment and logic are freely programmable |
| Input current / pin | max. 10 mA |
| Min. pulse time for inputs | 300 ms |
| Max. input frequency | 100 kHz, higher on request |
| Analog inputs | optionally 1 ... 2 analog inputs (12 bit) at 3.3 VDC measuring system supply |
| Output signals | 16 digital PNP outputs, assignment and logic (active high/low) are freely programmable |
| Output current | max. 15 mA per output / 500 mA total current across all outputs, the outputs are durable short circuit proof (no multiple short circuits) |
| Freewheel clutch/outputs | for inductive loads integrated (clamping voltage at the output max. -45 V) |
| Analog outputs | optional: ± 10 V PID or ± 10 V unregulated (each 12 bit) |
| Connections | industry standard connectors (3.81 mm grid, lockable) and additional RJ45 sockets (depending on version) |
| Power down memory | E²Prom (service life: 1.000.000 switching on/off cycles or 40 years) |
| Further options | 8 = only 8 instead of 16 digital in- and outputs |
| Accessories | NG13 power pack (primary: 115/230 VAC secondary: 24 VDC /600 mA), relay card RP8 with 8 changeover relays (28 VDC/250 VAC / 12 A), interface cable |
Environmental Conditions
| Operating temperature | -0 ... +45 °C |
| Storage temperature | -20 ... +50 °C |
| Humidity | max. 80 %, non-condensing |
| Protection class (front) | IP43 (installed state) |
| Protection class (rear) | IP00 |
One- or two-axis version
LCD display
Easy handling
Multi-lingual menu navigation
Option PID analog output available
Reference run
Manual-, single- and program mode
No videos found. Please check back soon!
We have a friendly team ready to help. If you have a question or enquiry please get in touch using this form, and we will get back to you as soon as possible. Or phone for an immediate response.
Our goal is to help people in the best way possible. this is a basic principle in every case and cause for success. contact us today for a free consultation.
Sign up to our newsletter
