C2 – Frame

The C2 – Frame is used to support a roller table setup alongside an FMB horizontal bandsaw. It gives the handling side of the machine a more stable support point, which is useful when material needs to move across the roller table more smoothly.

In practical use, it helps support material handling around the saw by giving the roller table a sturdier base. This is especially useful when cutting longer or heavier stock that needs more controlled support.

It is worth adding when a roller table needs extra support, particularly in setups where material length, weight, or general handling stability place more demand on the outfeed or support side of the machine.

Yes. With a maximum load of 750 kg, it is a sensible option for setups where the support frame needs to cope with heavier stock and provide a more robust working arrangement.

Yes. The height can be adjusted from 840 mm to 1,015 mm, which helps it work with different machine and roller table arrangements.

Yes. It should be suitably ballasted or fixed to the floor so it can provide the stable support it is designed for in everyday workshop use.

It is best suited to workshops using FMB horizontal bandsaws with roller table support, especially where longer lengths, heavier stock, or a more stable material handling setup are part of the job.

The 550 mm roller width helps define the support area available for material as it passes across the setup. In day-to-day use, that matters because it affects how well the frame supports stock during handling and transfer.