Many optional extras
Roller table machine connections available:
Loading side connection+roller
Unloading side connection
Unloading side pull-out roller surface
Standard specification
Metal cutting bandsaw – straight & swivel bow mitre cutting, gravity down feed [G], ‘manual’ pull-down bow option, bow handle with integral on/off switch,2 blade speeds 35/70 m/min, fast action vice, flood coolant, mounted on a steel cabinet.
Mitre Cutting:45° & 60° to the right,45° to the left.
cutting capacity @ 0°
Rounds 305mm
Squares 300mm
Rectangles 300 x 375mm
Band saw bow head angle rotation, pre-set positive stop(s) @ 0° then 60° to the right,
45° to the left & right, with graduated scale, locking lever
Gravity bow down feed, with down feed adjustment valve, alternatively pull-down bow,
hand grip with integral on/off switch,
Manual fast material clamping vice
Vice mounted upon linear guides, allowing clamping to the left or right of band saw blade,
thus allowing material loading from the left or right
2 Band saw blade speeds 35m/min or 70m/min – Selector switch
Simple cut length stop 0 to 600mm
Bowhead structure in 3 parts cast aluminium alloy, steel, cast iron
Dynamometric blade tensioning
Blade guide with the combined action of side bearings carbide wear plates and top bearing
Refrigerated coolant flow to both blade guides
Blade cleaning brush integrated into the head protection cover
Direct drive reduction gearbox, lubricated with long-lasting grease
Ergonomic working table and control panel
M42 Bandsaw Blade 3420mm x 27mm x 0.9mm
Heavy-duty fabricated steel base: 40-litre tank & coolant pump in the base.
Electrical cabinet: with 24VAC, main switch, safety unit and electric drives.
Total protection against highest voltage and short circuit current. IP55 Protection level.
Line voltage: 400V/50Hz/3Ph standard
Machine colours: Yellow RAL 1018 and Grey RAL 7037
To download the FMB SATURN + G product brochure, click on the pdf icon, or use our contact page to request the FMB brochure.
