| Angle |  |  |  |  |
| 0° | 330 | 330 | 330x510 | . |
- AUTOMATIC DOUBLE COLUMN BANDSAW MACHINE with blade h34 FOR 0° CUTS WITH CAPACITY UP TO 330x510mm.
- Totally protected machine with easy access to the working area for maintenance or cleaning operations.
- Possibility to load material directly with a crane on the machine's carriage.
- Machine with equipment for its lifting with crane or forklift.
- Carriage 500mmlong, managed by screw and encoder for the measure reading
- The carriage drives back after the cut in order to avoid damages at the blade, this can beset from the software.
- The carriage vice has a movable jaw, for the managing of not straight material.
- Scrap of 55mm, the MSR (vice for reduced scrap) is standard.
- Both vices, the cutting vice and the material feeding vice are equipped with cylinders at total stroke.
- Minimal cutting length = 8mm.
- Head descent on double column on linear guides.
- Reduction gearbox with hardened gears, using 95% of the engine power.
- Hydraulic blade stretching as option.
- Sensor for the blade rotation verify + stress detector as standard
- Inverter for the blade speed regulation from 16 to 120m/min as standard
- Mechanical device for the material recognizing on the feeding system.
- Swarf extractor as standard, which can be put on both sides and Its timing can be set on the panel.
- Tank for the lubrication liquid with capacity 100L and 3 different point of lubrication.
- 10' touch screen control panel.
- Automatic setting of the correct parameters for the cut through software depending on material and dimensions.
- Linux software against viruses.
- The main languages are available.
- 19 types of materials are already loaded, but there is always the possibility to insert new materials.
- Up to 90 programs are available.
- Statistics for the verify of the machine activity are always available
Cutting counter. - Possibility to modify the length, the pieces number and the interrupted cut also during the started cycle.
- Suggestion of the correct tooth pitch and adjusting of the cutting speed referring to the realone.
- MT-A (Option)for the support from distance.
No videos found. Please check back soon!
No downloads yet. Please check back soon!
