| Angle |  |  |  |  |
| 0° | 510 | 460 | 450x1030 | 460x600 |
| SHO 0° | 540 | 500 | 450x1030 | . |
- Semi-automatic bandsaw to cut at 0°.
- Head structure made in steel.
- Blade inclined of 5° to help section bars cut.
- Device against blade vibrations to reduce noise.
- Broken blade micro.
- Cutting zone lightening.
- Head approach on two chromate columns lubricated by a centralized system.
- Head feeding system with hydraulic cylinder and front balanced valve for feeding regulation and cutting optimizing.
- Blade cleaning brush driven by gearbox.
- Dynamometric blade tensioning.
- Blade guide with combined action of side bearings, carbide plates and top bearing, with a quick locking and unlocking system for the blade.
- Gearbox in hardened and grinded steel gears lubricated with long lasting grease.
- Material locking vice provided with motorized moving.
- Vice plane with a hardened, wear and tear standing replaceable surface.
- Very resistant work top supporting material on the loading side (PAO).
- Roller for the material sliding on board to allow an easy entrance of the material.
- Heavy duty carpentry basement.
- Sheet metal construction in different thickness, chips holding system and integrated cooling tank.
- Electric control panel which can be positioned from the user in the chosen ergonomic position.
- Hydraulic cooling pump for both blade guides.
- Hydraulic unit for head cylinder feeding.
- Electrical cabinet with 24VAC auxiliary tension, lockable main switch and electric drives.
- Total protection against highest voltage and short circuit current. Protection level IP 55.
Line voltage: 400V/50Hz/3Ph standard (230V/50Hz/3Ph-220V/60Hz/3Ph-440V/60Hz/3Ph also available). - Machine colours: Yellow RAL 1018 and Grey RAL 7016.
No videos found. Please check back soon!
No downloads yet. Please check back soon!
