Junior+G

Manual bandsaw for degree cuts from 0° to 60° right.
Head structure made of cast iron. Hydrauilic transducer which shows the stretching blade level, and handle with control button.
Blade guide with combined action of side bearings, cabide plates and top bearing.
Assisted cutting modality: thanks to an hydraulic cylindrical brake which controls the gravity lowing down movement; once the cut has been done, the head has to be lifted up by hand from the operator.
Manual clamping vice equipped with a quick-locking system of the piece.
Mechanical locks at 0° and 60° for the head rotation and graduated measure reading system with a strong locking lever.
Measuring rod with millimetric indication and turnable length stop.
Cooling tank installed on the higher part of the basement with release nozzle and electrical pump for refrigeration of both blade guides.
Electrical cabinet with auxiliary tension of 24VAC, main switch and user controls.
High elctrical protection and safety .
Feeding power tension: 400V/50Hz/3Ph.
Standard specification

Cutting of solid rounds, squares, box, structural sections
Blade tension reading cylinder with pressure gauge
Head rotation angle with stops at 0° and 60°
Immediate visualisation of the angle readable on a graduated scale
Solid cast iron vice and practical lever for a fast piece clamping
Blade stopping micro at the end of the cut
Hydraulic brake for a use even in gravitational mode
 

Cutting Capacities@ 0°:
Rounds 220 mm
Squares 210 mm
Rectangles 120 x 250 mm

Mitre Cutting: 45° & 60° to the right.

To download the FMB JUNIOR + G product brochure, click on the Downloads tab, or use our contact page to request the FMB brochure.