Hercules Tubes

Hercules Tubes
Semi-Automatic Bandsaw

Semi-automatic bandsaw machine to cut at 0°.
Head structure in 3 parts: special aluminium alloy, steel and cast iron.
Dynamometric blade tensioning.
Broken blade micro.
Head feeding system with hydraulic cylinder and front balanced valve for feeding regulation and cutting optimizing.
Blade cleaning brush driven by motor gearbox.
DTI “interrupted cut device” installed as standard equipment.
Blade guide with combined action of side bearings, carbide plates and top bearing.
Direct drive: Reduction gear box with inclined grinded case hardened teeth lubricated with long lasting grease.
VHZ electrical blade speed regulation for a wide range of blade speed selection.
Connection of the motor wheel to a flange with two conical bearings.
Auto-centering vice, specifically studied to cut pipes from 40 mm Ø min to 330 mm Ø.
Ergonomic working table and control panel.
Rugged loading side material support surface.
Heavy duty machine base, sheet metal construction, raised sides for chips & coolant containment.
Housing the coolant pump & 30l capacity tank plus the Hydraulic pump unit for bow cylinder movement, vice cylinder.
Electrical cabinet with 24VAC, main switch and electric drives.
Blade speed analogic regulator.
Total protection against highest voltage and short circuit current. Protection level IP 55.
Line voltage: 400V/50Hz/3Ph standard (230V/50Hz/1Ph-230V/50Hz/3Ph-220V/60Hz/1Ph-220V/60Hz/3Ph- 440V/60Hz/3Ph available).
Machine colours: yellow RAL 1018 and grey RAL 7036.