| Angle |  |  |  |  |
| 0° | 330 | 330 | 330x510 | . |
- Semiautomatic band saw machine to cut at 0°. Head structure in 3 parts: special aluminium alloy, steel and cast iron.
- Dynamometric blade tensioning.
- Broken blade micro.
- Head feeding system with hydraulic cylinder and front balanced valve for feeding regulation and cutting optimizing.
- Blade cleaning brush driven by motor gearbox.
- DTI “interrupted cut device” installed as standard equipment.
- Blade guide with combined action of side bearings, carbide plates and top bearing.
- Direct drive: Reduction gear box with inclined grinded case hardened teeth lubricated with long lasting grease.
- VHZ electronical blade speed regulation for a wide range of blade speed selection. Connection of the motor wheel to a flange with two conical bearings.
- Material clamping vice with rack system, manual positioning and hydraulic locking cylinder.
- Ergonomic working table and control panel.
- Rugged loading side material support surface.
- Heavy duty machine base, sheet metal construction, raised sides for chips & coolant containment.
- Housing the coolant pump & 30l capacity tank plus the Hydraulic pump unit for bow cylinder movement, vice cylinder.
- Electrical cabinet with 24VAC, main switch and electric drives.
- Blade speed analogic regulator.
- Total protection against highest voltage and short circuit current. Protection level IP 55.
- Line voltage: 400V/50Hz/3Ph standard (230V/50Hz/1Ph-230V/50Hz/3Ph-220V/60Hz/1Ph-220V/60Hz/3Ph- 440V/60Hz/3Ph available).
- Machine colours: yellow RAL 1018 and grey RAL 7036.
No videos found. Please check back soon!
