Corner Notching Machine Repair / Breakdown / Servicing & Support
JPS Machinery boast the Largest Dealer Service Team in the UK and can cater for all new & used corner notching machinery through our in house service team.
Typical Service Requirements:
At the beginning of the work shift, inspect the Corner Notching Machine a visual inspection of all areas will allow you to notice and address small issues before they become significant problems
It is important to understand the function, design, and operation of your Corner Notching Machine
The operators role in service / maintenance of a Corner Notching Machine is a major part of keeping the equipment running efficiently. It is important to immediately investigate strange noises, vibrations, or something that doesn’t look right. The quicker problems are detected and corrected, can often mean a less expensive fix.
it’s the small preventive measures that keep a Corner Notching Machine up and running.
A daily maintenance check list should include the following
Clean Hydraulic oil is the key to a healthy hydraulic system. Dirt particles may enter the hydraulic tank. Keeping the oil clean and filling the reservoir to capacity are critical, re filter the oil every 6 months using a 10/15 micron filter, completely replace the oil around 2/3000 hours of actual use
But clean the tank and replace the suction filters before replacing the hydraulic oil
Grease all slideways
Check the condition of the cutting blades
If material hold downs are fitted check their operation
Emergency stop buttons, check the circuits relays, look for welding of contactors
Check all terminal strip connections , relays, terminal boxes on motors.
Check all external cables and switches fittings for damage
Clean control cabinet to remove dust particles