• KNOW HOW - it makes the difference
    GET IN TOUCH TODAY 0113 2363366

SIRIUS Semi-Automatic Bandsaw

Straight & swivel bow mitre cutting
Manufactured in Italy by FMB – ‘Italian Excellence’

Standard specification:
Cutting of solid rounds,squares,box,structural sections

Bandsaw semi automatic – swivel mitre bow, gravity down feed [G], ‘Manual’ pull down bow option, bow handle with integral on/off switch, 2 blade speeds 35/70 m/min, electronic speed variator option, hydraulic locking vice, flood coolant, mounted on a steel cabinet.

Cutting Capacities @ 0°:
Rounds 240 mm
Squares 240 mm
Rectangles 210 x 280 mm

Mitre Cutting: 45° & 60° to the right.

To download the FMB SIRIUS product brochure, click on the pdf icon below, or use our contact page to request the FMB brochure.

  • Many different optional add’s

Roller table machine connection options:

  • Loading side connection+roller
  • Unloading side connection
  • Unloading side pull-out roller surface


Product Specification

  • Cutting capacity @ 0°
    Rounds 240mm – Squares 240mm
    Rectangles  240mm x 260mm – Bundle 100mm x 250mm@ 
  • Semi automatic function metal cutting bandsaw machine
  • Hydraulic down feed – bow descent adjustment valve
  • Material clamping vice manual positioning, hydraulic locking cylinder
  • 2 Band saw blade speeds 35m/min or 70m/min, Selector switch
  • Band saw bow head angle rotation, pre set positive stop(s) @ 0°, then 45° & 60° to the  right,
    with graduated scale, locking lever
  • In feed side material support roller
  • Simple cut length stop 0 to 600mm
  • Bow head structure cast aluminum alloy
  • Dynamometric blade tensioning – broken band saw blade sensor, micro switch
  • Blade guide with combined action of side bearings carbide wear plates and top bearing
  • Coolant flow to both blade guides
  • Blade cleaning brush integrated in the head protection cover
  • Direct drive reduction gear box, lubricated with long lasting grease
  • Ergonomic working table and control panel
  • M42 Bandsaw Blade 2700mm x 27mm x 0.9mm

Electronic control panel : Blade speed selection, piece counter, cutting height memorizing, alarm messages, auto check at start up. [ If purchased option ref VAT cutting angle display ]

Heavy duty fabricated steel base : with locking door, housing the 20 litre tank & coolant pump in the base, plus a hydraulic unit for the band saw bow movements,  bundle cutting unit cylinder(s)

Electrical cabinet : with 24V AC main switch, safety unit and electric drives.  Total protection against highest voltage and short circuit current. IP 55 Protection level

Line voltage : 400V/50Hz/3Ph standard – other voltages on request

Machine colours : Yellow RAL 1018 and Grey RAL 7037

Optional Equipment

Full details in the optional page of the brochure pdf download

  • Cutting Angle display [ ref VAT ]
  • Blade rotation sensor [ ref SENS ]
  • Hydraulic top clamp for bundle cutting [ ref DOTM ]
  • Vice pressure regulation [ ref RPM 1 ]
  • Option to down feed band saw bow manually [ ref M ]
  • Nebulizer mist spray cutting coolant 1 or 2 spray nozzles [ ref NB1 or NB2 ]
  • Electronic speed control, infinitely variable – 16m/min to 120m/min [ ref VHZ ]
  • Roller tables, 300kg load x 1000mm [ ref RPM1 & RPM2G ]
  • Material cut measure system – A length stop with measure strip and sight glass,
    1000mm to 6000mm [ ref FM1RS to FM6RS]

Downloads

Enquire About This Product

We would like to hear from you, please send us a message by filling out the form below and we will get back to you