• KNOW HOW - it makes the difference
    GET IN TOUCH TODAY 0113 2363366

Manual Pulldown Metal Cutting Bandsaw

Straight & swivel bow mitre cutting
Manufactured in Italy by FMB  Italian Excellence’

Cutting Capacities @ 0°:
Rounds 200 mm
Squares 200 mm
Rectangles 240 x 200mm

Mitre Cutting: 60° to the right, 45° to the left.

To download the FMB ANTARES product brochure, click on the pdf icon below, or use our contact page to request the FMB brochure.

  • Many optional extras

Roller table machine connections available:

  • Loading side connection+roller
  • Unloading side connection
  • Unloading side pull-out roller surface

Product Specification

  • cutting capacity @ 0°
    Rounds 200mm – Squares 200mm
    Rectangles 240mm x 200mm
  • Band saw bow head angle rotation, pre set positive stops at  0° then 60° to the right, 45° to the left
    & right with graduated scale, locking lever
  • Manual down feed band saw bow, bow head hand grip with integrated cycle button
  • Manual fast material clamping vice
  • Single material support roller, in feed side
  • 2 Band saw blade speeds 35m/min or 70m/min – Selector switch
  • Simple cut length stop 0 to 600mm
  • Bow head structure cast aluminium alloy
  • Dynamometric blade tensioning
  • Blade guide with combined action of side bearings, carbide wear plates and top bearing
  • Coolant flow to both blade guides.
  • Blade cleaning brush integrated in the head protection cover
  • Direct drive reduction gear box, lubricated with long lasting grease
  • Ergonomic working table and control panel
  • M42 Bandsaw Blade 2700mm x 27mm x 0.9mm

Heavy duty fabricated steel base : 20 litre tank & coolant pump in the base.

Electrical cabinet : with 24VAC, main switch, safety unit and electric drives.
Total protection against highest voltage and short circuit current. IP 55 Protection level

Line voltage : 400V/50Hz/3Ph standard

Machine colours : Yellow RAL 1018 and Grey RAL 7037

Optional Equipment

Full details in the optional page of the brochure pdf download

  • ‘A’ frame in feed single roller [ref C2 ]
  • Mechanical variator for band saw blade speed [ ref V ] 20m/min to 100m/min
  • Gravity down feed control of band saw bow – [ ref Kit G]
  • Cutting Angle display – [ ref VAT ]
  • Nebulizer mist spray cutting coolant 1 or 2 spray nozzles – [ ref NB1 or NB2 ]
  • Laser cutting line – [ ref LX ]
  • Roller tables, 300kg load x 1000mm – [ ref RPM1 & RPM2G ]
  • Material cut measure system – A length stop with measure strip and sight glass, 1000mm to 6000mm [ ref FM1RS to FM6RS]


Enquire About This Product

We would like to hear from you, please send us a message by filling out the form below and we will get back to you