FMB Lunar

Semiautomatic band saw machine to cut from 0° to 60° right.
Head structure in special aluminium casting alloy.
Dynamometric blade tensioning.
Broken blade micro.
Blade cleaning brush integrated in the head protection cover.
Head feeding system with hydraulic cylinder and descent adjustment by flow valve placed in front position.
Blade guide with combined action of side bearings, carbide plates and top bearing.
Reduction gear box with inclined grinded case hardened teeth lubricated with long lasting grease.
Output shaft of the reduction gear box Ø 40 mm and motor wheel connection with a keyless shaft/hub connection.
Version 2 speed 35/70 m/min – version VHZ 16÷120 m/min.
Material clamping vice with manual positioning with hydraulic locking cylinder.
Ergonomic working table and control panel. Head rotation angle stop at 0°, 45° and 60°.
Degrees measuring system, graduated scale and rugged in construction locking lever.
Loading side: Rugged in construction support roller with double positioning.
Millimetric reference length stop measuring system, cutting length 0÷600 mm.
Heavy duty machine base, sheet metal construction, raised sides for chips & coolant containment.
Base unit door with key locking, housing the coolant pump & 20 L capacity tank, plus the Hydraulic pump unit for bow cylinder movement, vice cylinder.
Electrical cabinet with 24 VAC, lockable main switch and electric drives.
Total protection against highest voltage and short circuit current. Protection level IP 55.
Control panel with buttons and switsches for blade speed selection, lowering and lifting the head, coolant selection and lights for the eventual alarms detection.
The machine has a sensor which memorises the head starting position.
Line voltage: 400V/50Hz/3Ph standard (Available: 230V/50Hz/1Ph-230V/50Hz/3Ph-110V/60Hz/1Ph-220V/60Hz/3Ph-440V/60Hz/3Ph-575V/60Hz/3Ph).
Machine colours: yellow RAL 1018 and grey RAL 7036.