Our section roll manufacturing partner is MG Srl Italy, Europe,s largest manufacturer of section & plate bending rolls.

MG Srl working in world markets have gained vast experiance producing section bending rolls to suit every requirement.

Model Range : AR 60 to 360

The model number indicates the diameter of the forming roll shafts

Strong fabricated construction, moveable control consul, all hydraulic  operation

Each drive shaft has its own hydraulic rotational drive unit,  the 2 lower rolls have individul DRO for position. At the side of each lower bending roll,  there is a 3 axis lateral roll unit for correction of distortion created during rolling.

Please note* its almost impossible to roll any section other than tube and flat without these lateral correction guides

 Section / Profile Rolling  : 

Angle, T bar, channel, flats, squares,rounds, box ,rectangle, tube, beams.

Capacity : PBH 180 : 
                Angle 150 x 150 x 15mm leg out - easy way
                Box 120 x 120 x 8mm - Rect 180 x 70 x 8mm

                PBH 240 :
                Angle 160 x 160 x 20mm leg out - easy way
                Box 150 x 150 x 8mm - Rect 200 x 75 x 8mm

                PBH 300 :
                Angle 200 x 200 x 28mm leg out - easy way
                Box 200 x 200 x 10mm- Rect 200 x 150 x 10mm

                PBH 360
                Angle 200 x 200 x 28mm leg out - easy way
                Box 400 x 400 x 16mm- Rect 400 x 200 x 10mm 

Section / Profile Rolling  : 
Angle, T bar, channel, flats, squares,rounds, box ,rectangle, tube, beams.

Capacity : PBH 60 :
                Angle 60 x 60 x 6mm leg in & leg out
                Box 50 x 50 x 3mm - Rect 60 x 30 x 3mm

                PBH 80 :
                Angle 80 x 80 x 8mm leg in & leg out
                Box 70 x 70 x 4mm - Rect 80 x 40 x 4mm

Section / Profile Rolling  : 
Angle, T bar, channel, flats, squares,rounds, box ,rectangle, tube, beams.

Capacity : PBH 100 :
                Angle 100 x 100 x 12mm leg out - easy way
                Box 80 x 80 x 6mm - Rect 120 x 60 x 4mm

                PBH 125 :
                Angle 120 x 120 x 15mm leg out - easy way
                Box 100 x 100 x 6.5mm - Rect 140 x 50 x 5mm

Section / Profile Rolling  : 
Angle, T bar, channel, flats, squares,rounds, box ,rectangle, tube.

Capacity : PBH 30 :
                Angle 40 x 40 x 5mm leg in & leg out
                Box 40 x 40 x 2mm - Rect 50 x 30 x 2mm

                PBH 50 :
                Angle 50 x 50 x 5mm leg in & leg out
                Box 60 x 60 x 3mm - Rect 50 x 40 x 3mm