Plate Roll : Model Range MH - MG - AK
These MG Srl plate roll machine offers hydraulic plate bending rolls of 3 or 4 roll configurization. All hydraulic : powered roll rotation, roll movements, drop end bearing, top & side roll supports, etc, superb bending performance, such as :
Flat at edge along the logitudinal seam 1.5 to 2.00 x material thickness.
The Plate rolls are operated from a moveable control consul, with joystick operation, with options for CNC control, loading systems, material side & vertical support systems.
Model MH : This is a 4 roll plate rolling machine
MH the ultimate bending roll machine.
minimum cylinder dia rolled is = 3 x top roll diameter. This plate roll is suitable for almost any Plate bending requirement, thin sheet or plate , this versitile plate bending roll, can be optionalised with CNC control, plate handling systems, top & side roll support systems. Plate roll operation : Able to be run in an automatic mode with CNC, or manual mode with DRO's Model MG : This is a 3 roll plate bending roll - principally for the heavier plate bending,
minimum cylinder dia = 3 x top roll diameter.
This is a restricted model range, primarily aimed at the top end of the heavier plate bending requirements.
Generally used manually with the aid of DRO's for side roll position and linear measurement
3 roll machines are not suitable for operation of the actual plate rolling process with a CNC control, simply due to plate slippage and the resulting loss of the plate linear position, however the MG srl 3 roll machine can be equiped with a control system for the powered in feed table, initial set up of plate prior to actual plate rolling. All other Plate roll optionals are available.
Model AK : This is a 3 roll machine - considered by our manufacturing partner MG Srl. to be their economy range, economy because this range of machines offers a minimum cylinder dia = 5 x top roll diameter.
Generally used manually with the aid of DRO's for side roll position and linear measurement
[ 3 roll machines are not suitable for CNC due to plate slippage and therefore loss of linear position] All other Plate roll optionals are available.
Plate Rolls - Plate Rolling MG Srl.
Standard Specifications : - 3 roll machine, all 3 rolls are hydraulically driven
- 4 roll machine, top & bottom central rolls are hydraulically driven
[ the 2 side pinch rolls are not driven] - Hardened rolls
- Roll(s) cambered to offset deflection
- Conical bending system
- Hydraulic drop end bearing for cylinder removal
- Moveable control consul, joystic operation - DRO for side roll position
0% to 100% Adjustable rotational speed
|
